A. ‘T’(Touchpoints) stands for General Touch Technology Co.,Ltd. All GeneralTouch touchscreen
model numbers begin with T. |
B. Stands for the applicable monitor types,which are divided into 4 types as follows:
F:CRT Flat
S:CRT Spherical
C:CRT Cylindrical
L:LCD( Liquid Crystal Display). |
C. Stands for the thickness of the glass as follows:
3:3mm Normal glass
4:4mm Normal glass
6:6mm tempered glass. |
D. Stands for the edge form of the touchscreen panel as follows:
V:Vertical
B:Bevel |
E. Stands for the size of the touchscreens, which is indicated with 4 numbers, the form is X X d X, d
here stands for the"dot",If the screen size is the round figure ,the size is indicated with the former
two numbers. For example:
17” touchscreen is indicated as 17;
18.1” touchscreen is indicated as 18d1;
10.4” touchscreen is indicated as 10d4. |
F. Stands for the dust-proof type, indicated as P, it is omitted if the touchscreen is not a dust-proof
type. |
G. Stands for the Vandalproof type, Indicated as S, it is omitted if the touchscreen is not a
safetouch type. |
H. Stands for the Waterproof type,indicated as W, it is omitted if the touchscreen is not a
waterproof type. |
The definitions for the models of all kinds of controllers:
 |
A. Stands for the layers of the circuit board, indicated with one Arabic number.
B. Stands for the times of modification of the circuit board, indicated with 3 Arabic numbers;
C. Stands for the interface of the controllers, falling into 2 categories: S and U. |
SAW Touchscreen
Part Number Definition